Click image to view full size image
Sonic Logging Test Tube
Product Description
KWAYT Sonic tubes are Push-fit type CSL tubes are made by thin black annealed steel tube, with an enlarge end in a bell mouth shape .Specially designed rubber gasket for the bell mouth ensure quick installation and perfect sealing to keep the tube integrity and avoid the entry of other material.
Product Type: |
Push Fit type sonic logging pipe |
Material: |
Q195 etc |
OD: |
50mm,53mm,57mm,102mm,112mm,163mm |
Wall Thickness: |
1-2mm |
Length: |
5.8m or 6m ,etc |
Surface Treatment: |
Black annealed |
End finish: |
Plain End |
Certification: |
Testing report,ISO |
Applications
Push-fit sonic pipe for foundation test is for industry construction of bridge, tall building, high speed way and more
Type: push-fit type
The size available:46mm/ 50mm/51mm/53mm/54mm/57mm/89mm/102mm/112mm/165mm or other size
The thickness: 0.8-1.8mm
Drilled shafts are prepared for integrity testing by CSL during their construction by installation of at least three sonic tubes. These tubes are usually attached to the reinforcement cage along the full length of the shafts. After concrete has been poured, the tubes are filled with water. In CSL, a transmitter emits an ultrasonic signal in one tube and the signal is sensed some time later by the receiver in another sonic tube. Poor concrete between the sonic tubes will delay or disrupt the signal. The engineer lowers the probes to the bottom of the shaft and moves the transmitter and receiver upward, until the entire shaft length is scanned. The engineer repeats the test for each pair of tubes. The engineer interprets data in the field and later reprocesses it in the office.
Installations
Certifications
http://www.kwaytsonictube.com/