Buttermilk Infant food drum dryer
Buttermilk infant food, refers to the milk products obtained from the milk or cream in the milk particles, it contains no less than 8.25% of the fat-free dry matter. Usually made of milk as raw material, rich in protein and fat, vitamin A, calcium and phosphorus.
Jiangsu Jianda Dry Engineering Co., Ltd., developed and produced of Buttermilk Infant food drum dryer, effectively help you to dry the buttermilk infant food.
First, Buttermilk Infant food drum dryer principle:
Double drum scraper dryer is through the rotation of the cylinder, in a heat conduction way to dry the liquid phase material or ribbon material which is attached to the outer wall of the drum dryer, it is a continuous operation equipment. The material to be dried is fed from the upper tank into the feeding tank of the double drum scraper dryer. The drying drum is driven at the specified speed by the drive. Material from the districuting coating device, to form a coating on the drum wall. The cylinder continuously into the heating medium, heating the cylinder, the heat transfer from the cylinder wall to make the water content vaporized, and then the dried qualified material wil be scraped by the scraper, sent by the screw conveyor to the tank, then packaging. The removed moisture from the evaporation, depending on its nature through the closed cover, into the corresponding treatment device; generally it is water vapor, can be directly from the top of the exhaust pipe into the atmosphere. The machine is mainly used for processing liquid materials, either uses the steam, hot water or hot oil heating for drying, but also can use cold water cooling knot.
Second, Buttermilk Infant food drum dryer characteristics:
1, High thermal efficiency: the supply heat to the cylinder, due to the drum dryer heat transfer mechanism is a heat conduction, heat transfer direction in the entire operation cycle maintains consistency, in addition to a small amount of heat radiation and a few heat loss at the cover, the majority of heat for evaporation, thermal efficiency can be as high as 80-90%.
2, Flexible operation, wide applicability. Can adjust a lot of drying factors of the drum dryer. Such as the concentration of the feeding material, the thickness of the coating film, the temperature of the heating medium, the rotational speed of the drum, etc., All can change the drying efficiency of the drum dryer, and many factors are not implicated. This gives the drum drying operation a great deal of convenience, so that it can adapt to a variety of materials and different production drying requirements.
3, Short drying time. The drying cycle of the material is generally only 10-15 seconds, suitable for heat-sensitive materials. If the drum dryer is set in a vacuum condition, it can be operated under reduced pressure.
4, The drying rate is high. As the coating film on the wall is very thin, generally 0.3-1.5mm, and heat transfer, mass transfer direction are the same.
If the buttermilk infant food drum dryer meets your requirement, welcome to buy the high quality and durable dryer from our factory. Well acknowledged as one of the leading manufacturers and suppliers of buttermilk infant food drum dryer, we must be your best choice. Don't miss it.